Esc $ - Epson TM-T88III Programming Manual

C O N F I D E N T I A L

ESC $

[Name] Set absolute print position
[Format] ASCII
Hex
Decimal
0 ≤
[Range] n
L
0 ≤
n
H
[Printers not featuring this command] TM-U230, TM-U220, TM-U210,
[Description] Moves the print position to (
print area.
[Notes]
The printer ignores any setting that exceeds the print area.
When standard mode is selected, the horizontal motion unit is used.
When page mode is selected, the horizontal or vertical motion unit is used for the print direction set by
ESC T.
• When the starting position is set to the upper left or lower right of the print area using ESC T, the
• When the starting position is set to the upper right or lower left of the print area using ESC T, the
If the horizontal or vertical motion unit is changed after this command is executed, the print position is not
changed.
Even if underline mode is turned on, the underline will not be printed under the space skipped by this
command.
[Model-dependent variations]
See program example and print sample for ESC $ and ESC
TM-J2000/J2100
The vertical or horizontal motion unit is specified by GS P.
Paper roll Print position commands
Print position commands
n n
ESC $
L H
n n
1B 24
L H
n n
27 36
L H
≤ 255
≤ 255
n +
L
horizontal motion unit is used.
vertical motion unit is used.
TM-J2000/J2100, TM-T90, TM-T88III, TM-L60II, TM-L90,
TM-U300A/B
× 256) × (horizontal or vertical motion unit) from the left edge of the
n
H
\.
ESC $
E
XECUTING COMMAND
TM-P60
Ver. 10.01 p. 169