Define User-Defined Kanji Characters - Epson TM-T88III Programming Manual

C O N F I D E N T I A L
FS 2
[Name]

Define user-defined Kanji characters

[Format] ASCII
Hex
Decimal
[Printers not featuring this command] TM-L60II,
[Range] The ranges of
c2
and
Models
Japanese model (JIS code)
Japanese model (SHIFT JIS code)
Simplified Chinese
Traditional Chinese
Korean
0 ≤
d
TM-J2000/J2100, TM-T90,
TM-T88III:
TM-U230, TM-U220, TM-U210,
[Description] Defines the user-defined Kanji character pattern specified by the character codes (
selected Kanji font.
•
Paper roll Kanji commands
Kanji commands
c1 c2 d1...dk
FS 2
c1 c2 d1...dk
1C 32
c1 c2 d1...dk
28 50
TM-P60
c1 c2
and differ, depending on models and the character code system used. The ranges of
for each model are as follows.
≤ 255
TM-L90:
k = 72 [Simplified Chinese model / Traditional Chinese model / Korean model]
= 72 [Japanese model: Kanji Font A (24 × 24)
k
= 60 [Japanese model: Kanji Font B (20 × 24)
k
= 32 [Japanese model: Kanji Font C (16 × 16)
k
k = 72
c1
specifies the first byte of a character code for a user-defined Kanji character.
FS 2
c1 c2
21H ≤
c1
= 77H
40H ≤
c1 c2
= ECH
80H ≤
c2
A1H ≤
c1
= FEH
A1H ≤
c1 = FEH
A1H ≤
c1
= FEH
k
TM-U300A/B: = 32
≤ 7EH
c2
≤ 7EH,
≤ 9EH
≤ FEH
c2
≤ FEH
c2
≤ FEH
c2
c1 and
S
ETTING COMMAND
c1
c2 ) of the currently
Ver. 10.01 p. 499