Printing (Netware); Netware Settings; In Remote Printer Mode Using The Netware 4.X Bindery Emulation - Konica Minolta bizhub C452 Network Administrator's Manual

2.32

Printing (Netware)

2.32 Printing (Netware)
Configure settings for printing in a NetWare environment.
Before you start printing in a NetWare environment, you must set the NetWare file system on this machine.
d
Reference
For details on how to install the printer driver, refer to the "User's Guide [Print Operations]".
The current NetWare connection can be checked if necessary. For details, refer to page 2-105.
2.32.1

NetWare Settings

In the administrator mode of PageScope Web Connection, select "Network" ö "NetWare Setting" ö
"NetWare Setting".
The required items depend on your operating environment. Set the items by referring to the following figure.

In Remote Printer mode using the NetWare 4.x Bindery Emulation

0 When you use the Bindery Emulation, make sure that the Bindery Emulation has been enabled on the
NetWare server.
1
From the client, log in the NetWare file system as Bindery with the administrator authority.
2
Start Pconsole.
3
Select "Quick Setup" from "Available Options" list box, and press the [Enter] key.
4
Fill in "Print Server Name", "Printer Name", and "Print Queue Name". Set the "Type" of the printer to
"Other/Unknown", and save them.
5
Terminate Pconsole by pressing the [Esc] key.
6
Load the PSERVER.NLM file on the NetWare Server console.
Then, configure the following settings in "NetWare Setting".
bizhub C652/C652DS/C552/C552DS/C452
2
2-101