Basic Settings For Tcp/Ip Communication; Tcp/Ip Settings - Konica Minolta bizhub C452 Network Administrator's Manual

2.2

Basic settings for TCP/IP communication

2.2 Basic settings for TCP/IP communication
Configure settings to use this machine in the TCP/IP network environment.
These settings are required before using this machine via the network.
NOTICE
To enable changed network settings, turn the main power of this machine off and on again.
To turn the main power switch off and on, first turn the main power off, and then on after 10 seconds or more
has elapsed. Not doing so may result in an operation failure.

TCP/IP Settings

In the Administrator Settings screen of the control panel, select [Network Settings] ö [1 TCP/IP Settings].
d
Reference
For details on how to go to the Network Settings screen, refer to page 3-3.
For details on the menu structure of the network setting in the control panel, refer to page 3-5.
For details on how to use this machine in the IPv6 environment, refer to page 2-159.
Item
[ON]/ [OFF]
[IPv4 Settings]
Item
IP application
method
Auto Input
IP Address
Subnet mask
Default Gateway
[DNS Host]
Item
Dynamic DNS Set-
tings
bizhub C652/C652DS/C552/C552DS/C452
Description
Select [ON].
Description
Select whether to automatically obtain the IP address or
directly specify it.
To automatically obtain the IP address, select the auto-
matic retrieval method.
To directly specify the IP address, enter the IP address of
this machine.
When directly entering the IP address, configure the sub-
net mask of the network to be connected.
When directly entering the IP address, specify the default
gateway of the network to be connected.
Description
Select [Enable] when automatically registering the host
name specified in [DNS Host Name] with the DNS server
that supports the Dynamic DNS function.
2
Prior check
Prior check
IP application meth-
od
IP address of this
machine
Subnet mask of this
machine
Default gateway of
this machine
Prior check
Is Dynamic DNS
supported?
2-6