Sending Scanned Data To The User's E-Mail Address (Scan To Me); Tcp/Ip Settings - Konica Minolta bizhub C452 Network Administrator's Manual

2.16

Sending scanned data to the user's E-mail address (Scan to Me)

2.16 Sending scanned data to the user's E-mail address (Scan to Me)
Configure settings to send scanned data to the user's E-mail address.
This function is available when user authentication is enabled and the E-mail address of the user is registered
as user information.
If the E-mail address of a logged in user is registered, the [Me] is displayed as a destination, and the user can
simply select the [Me] to send the data to the user's own E-mail address.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
Do you have an
SSL/TLS communi-
cation with the
SMTP server?
Yes
SMTP over
SSL/Start TLS
d
Reference
For details on how to send a file to the user's own E-mail address, refer to the "User's Guide [Network
Scan/Fax/Network Fax Operations]".
2.16.1

TCP/IP Settings

Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-6.
bizhub C652/C652DS/C552/C552DS/C452
TCP/IP Settings
User Authentica-
tion
E-mail Transmis-
sion (SMTP)
SMTP authenti-
cation?
No Yes
SMTP Authenti-
cation
Finish
POP before
SMTP?
No Yes
POP before SMTP
(1) POP over SSL?
(2) APOP?
Yes
(1)POP over SSL
(2)APOP Authenti-
cation
2
No
No
2-51