Sending Scanned Data To The Ftp Server; Tcp/Ip Settings; Ftp Transmission Setting - Konica Minolta bizhub C452 Network Administrator's Manual

2.20

Sending scanned data to the FTP server

2.20 Sending scanned data to the FTP server
Configure settings to send scanned data to the FTP server.
You can send scanned data to the specified folder in the FTP server via the network, which contains the FTP
server. This allows you to download the data sent to the FTP server from a computer via the network. This
function is suitable to send a large amount of data such as high-resolution data.
If a proxy server is in network environment, you can configure settings to access the FTP server on Internet
via the proxy server.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
d
Reference
For details on how to register the FTP address, refer to page 2-232.
For details on FTP file sending, refer to the "User's Guide [Network Scan/Fax/Network Fax Operations]".
2.20.1

TCP/IP Settings

Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-6.
2.20.2

FTP transmission setting

In the administrator mode of PageScope Web Connection, select "Network" ö "FTP Setting" ö "FTP TX
Setting".
bizhub C652/C652DS/C552/C552DS/C452
TCP/IP Settings
FTP transmission setting
Finish
2
2-66