2.11
Specifying the date and time of this machine
2.11.4
Timer Adjustment Setting
In the administrator mode of PageScope Web Connection, select "Maintenance" ö "Date/Time Setting" ö
"Timer Adjustment Setting".
Item
Timer Adjustment
Setting
Auto IPv6 Retrieval
NTP Server Ad-
dress
Port No.
Auto Timer Adjust-
ment
Polling Interval
[Adjust]
bizhub C652/C652DS/C552/C552DS/C452
Description
Select "ON".
To automatically obtain the IPv6 address of the NTP serv-
er, select "ON".
This item is necessary when IPv6 is used while DHCPv6 is
enabled.
Enter the NTP server address.
Format: *.*.*.* (Asterisk * can be 0 to 255)
If the DNS server has already been configured, you can
enter the host name instead.
If "IPv6" is set to "ON", you can also specify the IPv6 ad-
dress.
Enter the port number.
Default setting: 123
To automatically connect to the NTP server and correct
the time, select "ON".
When automatically correcting the time, specify its interval
on a hour basis.
Click this button to connect to the NTP server in the spec-
ified conditions and adjust the time.
2
Prior check
Can the IPv6 ad-
dress be obtained
automatically?
Server address
Server port number
Can the time be cor-
rected automatical-
ly?
2-33