In Print Server Mode Using The Netware 4.X Bindery Emulation - Konica Minolta bizhub C452 Network Administrator's Manual

2.32 Printing (Netware)
Item
IPX Setting
Ethernet Frame
Type
NetWare Print
Mode
Print Server Name
Printer Number

In Print Server mode using the NetWare 4.x Bindery Emulation

0 When you use the Bindery Emulation, make sure that the Bindery Emulation has been enabled on the
NetWare server.
0 When you select the Print Server mode, the IPX protocol must already be loaded on the NetWare server.
1
From the client, log in the NetWare file system as Bindery with the administrator authority.
2
Start Pconsole.
3
Select "Quick Setup" from "Available Options" list box, and press the [Enter] key.
4
Fill in "Print Server Name", "Printer Name", and "Print Queue Name". Set the "Type" of the printer to
"Other/Unknown", and save them.
5
Terminate Pconsole by pressing the [Esc] key.
Then, configure the following settings in "NetWare Setting".
Item
IPX Setting
Ethernet Frame
Type
NetWare Print
Mode
Print Server Name
Print Server Pass-
word
Polling Interval
Bindery/NDS Set-
ting
File Server Name
bizhub C652/C652DS/C552/C552DS/C452
Description
Select "ON".
Select a frame type to be used.
Select "Nprinter/Rprinter".
Enter a print server name to be operated as the Nprint-
er/Rprinter (up to 63 characters, excluding / \ :; , * [ ] < > |
+ = ? .).
Enter the Nprinter/Rprinter number.
Description
Select "ON".
Select a frame type to be used.
Select "PServer".
Enter a print server name to be operated as Pserver (up to
63 characters, excluding / \ :; , * [ ] < > | + = ? .).
Enter a print server password if necessary (up to 63 char-
acters).
Set a job inquiry interval.
Select "Bindery/NDS Setting".
Enter the priority file server name to be used in the Bindery
emulation mode (up to 47 characters, excluding /\ :; , * [ ]
< > | + = ? .).
2
Prior check
Frame type
The print server
name specified in
Step 4
Prior check
Frame type
The print server
name specified in
Step 4
2-102