Linking An Openapi System With This Machine - Konica Minolta bizhub C452 Network Administrator's Manual

2.54

Linking an OpenAPI system with this machine

2.54 Linking an OpenAPI system with this machine
Configure the OpenAPI settings of this machine.
These settings are required when you want to link an OpenAPI system with this machine.
If you have registered the device certificate on this machine and if you use this machine as a communication
server, you can encrypt OpenAPI communications from the client to this machine using SSL. Also, this
machine can request the OpenAPI client for a submission of the client certificate. When the client connects
to this machine, the submitted client certificate is verified and the client can be authenticated.
When this machine communicates as a client and when the certificate is submitted by the server, this
machine can verify the submitted certificate.
If the OpenAPI connection application supports the SSDP function, you can notify the application that the
OpenAPI service has started on this machine by using the SSDP function of this machine. If the OpenAPI
service is searched by the SSDP function in application, a response will be returned when this machine
satisfies relevant search conditions.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
Reference
- If you use PageScope Authentication Manager for authentication, configure the OpenAPI setting to use
SSL/TLS.
bizhub C652/C652DS/C552/C552DS/C452
TCP/IP Settings
SSDP Settings
Do you use SSL communica-
tion?
Yes
Device Certificate Setting
OpenAPI Setting
Do you validate the certificate?
Yes
Certificate validation
Finish
No
No
2
2-173