Sending Scanned Data To A Computer On Network; Tcp/Ip Settings - Konica Minolta bizhub C452 Network Administrator's Manual

2.12

Sending scanned data to a computer on network

2.12 Sending scanned data to a computer on network
Configure settings to send scanned data to a computer on network (SMB transmission).
Before SMB transmission, specify a Windows shared file in the computer to receive data in. If Samba is
installed, data can be transmitted to a computer that is equipped with a non-Windows OS. SMB transmission
is also available for the CIFS service (TCP/IP) that is running on the NetWare server.
To specify a computer over a router using the Windows name (NetBIOS name), use the WINS server.
To perform SMB sending in the IPv6 environment, enable the direct hosting service. Enabling the direct
hosting service allows you to specify the destination computer with the IPv6 address or computer name (host
name). When specify the destination with the computer name (host name), use the DNS server to obtain the
IPv6 address.
To send data to a computer with Windows Vista/Server 2008 installed, you can perform name resolution
using the LLMNR function even if DNS server is not present. To perform the name resolution especially in the
IPv6-only communication environment under Windows Vista/Server 2008, it will be convenient to enable the
LLMNR function.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
Do you use the WINS server?
WINS Setting
d
Reference
For details on how to register the SMB address, refer to page 2-232.
For details on SMB file sending, refer to the "User's Guide [Network Scan/Fax/Network Fax Operations]".
2.12.1

TCP/IP Settings

Configure settings to use this machine in the TCP/IP network environment.
- To specify the destination computer with the computer name (host name) for SMB transmission in IPv6
environment, prepare a DNS server and configure DNS settings in this machine.
For details, refer to page 2-6.
bizhub C652/C652DS/C552/C552DS/C452
No
Yes
No
TCP/IP Settings
Client Setting
IPv6 environment?
No
Do you send data to Win-
dows Vista/Server 2008?
Yes
LLMNR Setting
Finish
2
Yes
Direct Hosting Setting
2-34