Network Printing In A Netware Environment - Konica Minolta bizhub C252 User Manual

Setting Up Network Printing
*1
If the printer driver is installed using the installer while this machine is con-
nected to the network, the required Peer to Peer Printing Tool is also installed
automatically, and Port 9100 is created.
*2
The printer driver is not compatible with the operating system.
*3
Installing the printer driver using the installer is not applicable.
*4
Not required since standard operating system functions are used.
To obtain the Peer to Peer Printing Tool, consult the dealer where you pur-
chased this machine.
To specify the driver settings when installing the Peer to Peer Printing Tool,
refer to "Port 9100 Printing (Windows 98SE/Me/2000/XP/Server 2003)" on
page 3-13.
When using SMB printing, you can perform network printing without install-
ing the Peer to Peer Printing Tool software. For details, refer to "SMB Print-
ing" on page 3-8.
Reminder
Before setting up network printing, install the printer driver. For details on
installing the printer driver, refer to "Installing the Printer Driver" on
page 2-1.
To perform network printing, change the printer port for the installed
printer driver to one for a network connection, and then change the set-
tings on this machine as necessary. For an IPP connection, it is neces-
sary to install the printer driver first.

Network Printing in a NetWare Environment

NetWare Version
NetWare 4.x
NetWare 5.x/6
C252
Protocol Used
IPX
IPX
TCP/IP
Emulation
NDS/Bindery
NDS
NDPS(lpr)
3
Service Mode
Pserver/Nprinter
Pserver
3-4