Msds For Silicone Oil - Tektronix Phaser 850 User Manual

Phaser 850 Printer Material Safety Data Sheets

MSDS for Silicone Oil

SECTION 1- PRODUCT IDENTIFICATION
Trade Name: Tektronix Silicone Intermediate Transfer Layer Fluid, impregnated into printer's
maintenance roller.
Tektronix Part Number: 016-1822-00 (replacement standard maintenance kit)
Tektronix Part Number: 016-1834-00 (replacement extended maintenance kit)
Product Use: Tektronix Phaser® 850 color printers
SECTION 2 - INFORMATION ON INGREDIENTS
Tektronix Silicone Intermediate Transfer Layer Fluid is a proprietary blend of silicone oils. Specific
identities of components, and their percentage composition, are withheld as a trade secret.
SECTION 3 - HAZARDS IDENTIFICATION
ROUTES OF EXPOSURE: Skin, eyes
POTENTIAL HEALTH EFFECTS: Health effects from this product are expected to be negligible,
when product is used as intended.
Immediate Effects:
Inhalation: Not an expected route of entry
Skin: May cause mild irritation.
Eyes: May cause mild irritation.
Ingestion: Not an expected route of exposure.
Chronic Effects: None known or expected.
SIGNS AND SYMPTOMS OF EXPOSURE
Mild skin or eye irritation.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE
None known.
SECTION 4 - FIRST AID MEASURES
INHALATION: Not a route of exposure for this product.
EYES: Flush thoroughly with water. Seek medical attention if symptoms occur.
SKIN: Wash thoroughly with soap and water. Seek medical attention if symptoms of irritation occur.
INGESTION: Not a route of exposure for this product.
SECTION 5 - FIRE FIGHTING MEASURES
FLASH POINT: Flash point of fluid is 226 degrees C, Pensky-Martens closed-cup tester.
EXTINGUISHING MEDIA: All extinguishing agents classified as B and C are effective, including dry
powder(s), CO , and halon.
2
FIRE FIGHTING INSTRUCTIONS: As for any fire, wear self-contained breathing apparatus, pressure
demand, MSHA/NIOSH approved, and protective gear.
FIRE AND EXPLOSION HAZARDS. During a fire, irritating and toxic substances may be generated
by thermal decomposition or combustion. No unusual fire hazards expected.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
SPILL OR LEAK: Fluid is impregnated into maintenance roller. Small amounts (i.e., drops) may
result from normal handling. Absorb and place in an appropriate disposal container. Clean spills
thoroughly because residue can be slippery.
SECTION 7 - HANDLING AND STORAGE
HANDLING: Wash hands with soap and water after contact. Clean spills per SECTION 6.
STORAGE: No special requirements.
SECTION 8 - EXPOSURE CONTROL - PERSONAL PROTECTION
No special protection indicated when used as intended.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE: Clear liquid impregnated into maintenance roller.
ODOR: Mild
SOLUBILITY IN WATER: No data
SPECIFIC GRAVITY: Specific gravity of fluid is 0.97 (water=1)
Advanced Features and Troubleshooting Manual 145