Heating System (Optional) - Ferrari 612 scaglietti Owner's Manual

Lumbar support adjustment (optional on the passenger seat)
Push control C, on the horizontal arrows to increase or decrease
lumbar support, and on the vertical arrows to lift or lower the lumbar
support, and on the vertical arrows to lift or lower the lumbar support.
The lumbar support adjustment on the passenger seat is optional and is
supplied together with the "Seat heating system".
Seat back tilt
To tilt the front seat back, lift lever D and move the backrest forward.
To facilitate access to the rear seats or exiting the vehicle, the front seats
are equipped with the "Easy Entry" device (operative with doors open
only), which moves the seats forward and lowers them automatically
when the relative backrests are lowered and returns them to the
original position when the backrests are lifted again.
C

Heating System (optional)

The seat heating system is activated by turning control E. Two heating
pads are used to heat the seat. When this function is active for one
or more seats, the relative warning light on the instrument panel
illuminates.
Using control E the driver can set the intensity of the heating, choosing
from 3 levels identified on the control with the numbers "1", "2" and
"3".
Seat position memory
The system can store and recall three different positions for the driver's
seat, the external rear-view mirrors and the steering wheel.
Memorisation is only possible with the ignition key in position II.
Adjust the position of the seat, the headrest, the external rear view
mirrors and the steering wheel.
Then engage reverse and position the external rear view mirrors once
again to ensure you have the best possible visibility for performing the
manoeuvre, then disengage reverse gear.
Next, push one of the three buttons F , each one corresponding
to a memorisable position, for 3 seconds until you hear a double
confirmation tone.
E
D
2
F
71