Ferrari 612 scaglietti Owner's Manual page 133

• Place the base of the jack on flat, firm ground, positioning it with one
of the lifting points located underneath the vehicle underfloor.
• Raise the vehicle carefully, using the jack, until the wheel is lifted off
the ground.
If the jack is not positioned correctly, the vehicle could
slip off.
The jack supplied must only be used for replacing the
wheels.
G G
G G
G G
• Completely unscrew the five wheel stud bolts and remove the wheel.
• Fit the spare wheel and screw the five wheel stud bolts back on.
• Lower the vehicle and remove the jack.
• Tighten the wheel stud bolts completely, moving diagonally from one
• Put the wheel removed and the tools in the luggage compartment,
G G
Therefore after fitting, it will not be monitored by the tire
pressure system. Anyway, it does comply with International
Regulation ECE R64/01. Once it is fitted, we recommend you
visit the nearest service centre of the F
G G
G G
to the next.
ensuring they cannot contact any devices fitted in the luggage
compartment.
As soon as possible, tighten the wheel stud bolts with the torque
wrench to a torque of 100 Nm.
The spare wheel is not equipped with the tyre pressure
monitoring sensor (see label on spare wheel bag).
G G
E
D
F
S N .
ERRARI ERVICE ETWORK
D Wrench
E, Stud bolt
F Jack
G Lifting points
4
133