General - Ferrari 612 scaglietti Owner's Manual

"TFT" display
Located in the instrument panel, it performs the following functions:
- indication of the control parameters
- indication of general information while driving
- fault warnings.
2
This can be displayed with two colour options:
- day (grey background);
- night (black background).
To modify the display brightness, refer to page 27.
The user can interact with the system by choosing the graphic
configuration and by setting the parameters.
Three different screen views are available, depending upon the display
type chosen:
A permanent display of information (shared by all display
configurations);
B display of information generated by specific events and/or on
request;
C display of virtual control gauges.
C
22
C
B
A
Controls
The screen page activation and setting are controlled by pressing the
MODE, DISP, "UP", "DOWN" and "ENTER" buttons found on the
steering wheel.
Description of controls
MODE
Button pressed momentarily (< 2 sec):
- The MENU page is activated;
- Within a submenu: returns to the previous screen;
- Odometer flashing: resets to the previous data display;
- During an error message display cycle: exits the current display
(ESCAPE function);
Button pressed at length (> 2 sec):
- MENU page not active and TRIP B disabled: resets TRIP A;
- MENU page not active and TRIP B enabled: selects odometer on
display (either total, A or B);
- MENU page active: returns to the last screen displayed before MODE
button was pressed.
B
A
MODE
DISP