Cl. 745-26 U. -28: Transfer Devices For Work Method B/C - Duerkopp Adler 745-26 Service Instructions Manual

5. Cl. 745-26 u. -28: Transfer Devices for Work Method B / C
28
The transfer device is avaiable in 4 executions:
Transfer device right 180 mm
Transfer device left 180 mm
Transfer device right and left 180 mm
Transfer device right and left 220 mm
The flap nippers should transport the flap unimpaired under the open
flap clamp up to the front of the gripping folder.
In the following the setting for the transfer device at the right is
described.
Caution Risk of Injury !
Turn the main switch off.
Set the transfer device only with the main switch turned off.
Conduct setting work with the sewing machine running only while
exercising the greatest possible caution.
Aligning the flap nippers to the folder
–
Loosen screws 1 and 2.
–
Align bracket 3 with the slewing device parallel to the gripping
folder.
–
Tighten screws 1 and 2 again.
0794 004261
0794 004241
0794 004281
0794 004291
1
2
3