Scope Of Delivery; Installing The Sewing Unit; Setting The Work Height - Duerkopp Adler 550-12-12 Installation Instructions Manual

1. Scope of Delivery

2. Installing the Sewing Unit

2.1 Setting the Work Height

Basic equipment consists of:
–
Complete sewing machine for advance crimping
–
Frame MG53-3 with pallet table top 1530 x 951 mm
–
Multi-program controls 200-3
–
Direct current positioning drive
–
Compressed Air Maintenance Unit
–
Sewing light
–
Thread stand
–
Tools and small parts in the accessories pack
Optional equipment Bordering (special order)
ATTENTION !
The sewing unit may only be set up by trained skilled personnel.
Before installing the sewing unit it is essential that all transport
security be removed !
The work height is adjustable between 75 cm and 85 cm (measured to
the top of the table).
–
Loosen the set screws 1 on both sides of the frame.
–
Horizontally set the work pkate to the desired height.
In order to avoid tilting pull out or push in the work plate equally on
both sides.
–
Tighten the set screws 1 again.
1
3