Stacker Addition - Duerkopp Adler 745-26 Service Instructions Manual

16.2 Stacker Addition

108
The stacker addition (Order no.: 0794 014001) is used in combination
with the throw-over stacker. This is necessary for sewing pieces which
are positioned crosswise or are so short that the throw-over stacker
does not catch them.
The transport rollers 1 transport the small sewing pieces into the
stacker opening of the throw-over stacker.
Caution Risk of Injury !
Turn the main switch off.
Set the stacker addition only with the main switch turned off.
Setting the height of the transport rollers
–
The height of the transport rollers is set as described in
Chapter 16.1.
Setting the roll speed and activation period
The roll speed and the activation period of the transport rollers are set
at the controls.
–
Activate the setting and testing program " Checking the
Smoother Function ".
See Short Description DAC Chapter 6.3.3.
Factory setting: v = 5 ( min. roll speed )
1