2.13 Work Area, Angle and Length
18
The dart depth is dependent on:
–
the form set used
–
the dart length
–
the setting of the folding table
The folding table is continuously adjustable between 0 - 10°.
The dart depths for other angles and lengths can be found in the
diagrams.
The curve for the form set 0793 078002 is also listed.
Caution Risk of Injury !
Turn the main switch off.
The angle may only be set with the sewing unit turned off.
Setting the angle
–
Press handle 2 together and set the folding table according to the
scale 1.
–
Release the handle.
The angle is set.
Setting the length
Maximum dart length 150 mm.
–
The seam length control occurs via programming
(keys L1, L2, L3 ) or via the light barrier.
The programmed seam length control is recommended for
diaphanous material.
1
2