3. Cl. 745-28: Folder (Work Method A)
1
2
10
For the unimpeded transport of the material and a flawless working of
the pocket opening, the folder and the cutting tools, as well as the
marker lights, must be aligned to the center of the pocket opening.
The incision of the center knife is seen as the center of the pocket
opening.
The reference line 2 was traced on the machine plate at the factory.
It runs at a clearance of 125 mm parallel to the center of the pocket
opening, that is, to the center knife incision.
With proper mounting, the folder can be aligned from the reference
line to the center of the pocket opening.
Proper mounting of the folder:
–
The folder 1 is pushed up until touching on the clamping piece 5.
–
The pin 3 catches in the slot 4.
3
4
5
1