Carriage Home Position Sensor Removal - Epson DFX-8000 Service Manual

3.2.7.3 Carriage Home Position Sensor Removal

Step 1: Remove the upper housing. (Refer to section 3.2.3.4.)
Disconnect the carriage home position sensor cable from the connector on the head cable
Step 2:
board.
Step 3: Remove the screw securing the carriage home position sensor, then remove the sensor.
A S S E M B L Y P O I N T :
When reattaching the carriage home position sensor, mate the screw and tab holes with the screw
hole and tab on the mechanism unit.
Figure 3-30. Carriage Home Position Sensor Removal
3-27
REV.-A