Epson DFX-8000 Service Manual page 120

REV.-A
Remove the eight CTBB(M4 X 16) screws fixing the bottom panel to the lower housing. Draw
Step 7:
the bottom panel 5 inches toward you while keeping it erect.
Step 8: Slowly turn the bottom panel down towards you.
Remove the CBB (M3 X 12) screw fixing the ground cable to the base plate.
Step 9:
Step 10: Disconnect the cable from connecter CN2 on the main
'Lower
Rear Cover
Figure 3-20. Bottom Panel Removal -1
Figure 3-21. Bottom Panel Removal -2
3 - 1 8
Housing
board.
/