Power Supply Board Removal - Epson DFX-8000 Service Manual

3.2.4.3 Power Supply Board Removal

Remove the bottom panel. (Refer to section 3.2.3.5.)
Step 1:
Remove the cables running from connectors CN 1, CN2, CN3 and CN4 at the power supply
Step 2:
board.
Remove the six CBB (M3 X 12) screws and the CBS (0) (M3 X 8) screw fixing the power supply
Step 3:
board to the base plate, and remove the power supply board.
(
Figure 3-24. Power Supply Board Removal
3-21
I
(M3X 12)