Table of Contents
Advertisement
DLQ-3000+
3.2.6.2 HP (Home Position) Sensor Assembly Removal
Step 1) Remove the printer mechanism. (See Section 3.2.6.1.)
Step 2) Release the hooks securing the HP sensor assembly to the CR frame, and remove
the sensor.
H P S e n s o r A s s e m b l y
3.2.6.3 Front Paper Sensor Removal
Step 1) Remove the printer mechanism. (See Section 3.2.6.1.)
Step 2) Release the joint for the detection lever and the front paper sensor, and release the
hook securing the front paper sensor to the right frame assembly in the printer
mechanism. Then remove the front paper sensor.
P a p e r E j e c t F r a m e
D e t e c t i o n L e v e r
F r o n t P a p e r S e n s o r
Figure 3-14 Removal. Front Paper Sensor Removal
3-14
C R F r a m e
Figure 3-13. HP Sensor Removal
R i g h t F r a m e A s s e m b l y
Rev. A
Advertisement
Chapters
Table of Contents
