Epson DFX-8000 Product Information

Printer Specifications

Printing
Printing method:
9-pin impact dot matrix
Pin
configuration:
Two 9-pin columns
Printing speed:
high-speed
Printing direction:
Bidirectional logic-seeking for tat printing.
Unidirectional for graphics (can also be
switched to bidirectional using the proper
software command).
Line spacing:
increments of
Paper feed speed:
Approx. 17 ms/line at l/&inch line spacing
during continuous feeding
26 ms/line at l/&inch line spacing during
Printable columns:
3Kbyte
Input buffer:
9-Pin Printers
power cable
lock nuts
12
10
12 192
or
of an inch
DFX-8000 DOT-MATRIX PRINTER
Character fonts:
characters:
Paper
Paper type:
Paper weight:
Paper thickness:
5 / 2 3 / 9 0
Available sit&a
Font
Standard character set
ASCII
(including italic characters)
96 characters
13 international character sets
(including italic characters)
Epson Extended Graphics character set
Continuous-feed paper:
holes
The sprocket must be perfectly
l
circular or circular and notched.
The holes must be cleanly cut.
l
The perforation between pages should
l
not way to the edges of
extend all the
paper, as shown below.
Continuous paper: 14 to 22 Ibs.
(52.6 to 82.7 g/m')
Multi-part fotms:
to 56.4 g/m'] x N)
Continuous paper (including multi-part
forms):
Front - up to 0.46 mm (0.018')
Rear - up to 0.30 mm (O.Ol2')
Up to 0.19 mm (0.0075') including backing
sheet
Overlapping area on overlapping multi-part
up to 0.70 mm (0.028')
with
the
DFX-8000-1