Figure 1-19. Label And Carrier - Epson DFX-8000 Service Manual

REV.-A
N O T E S : 1 . If label forms are used, the paper should be loaded from the front tractor. The paper select
function must not be used.
2.
If label forms are used, the paper should be fed only in the normal direction, using the
MICRO FEED switch.
3.
If label forms are used, the paper must not be fed in the reverse direction. (Reverse paper
feeding could cause the paper to jam, or the labels to stick to the unit.)
4. When label forms are used, they must not be torn off.
5. When label forms are used, the TOF (TOP OF FORM) function should not be executed.
6.
Easy come-off labels should not be used.
7. Every label must be put on the carrier.
8. Corners of the labels must be rounded.
9. The surface of label must be flat.
W A R N I N G
Do not perform the back feed.
Do not perform the paper select.

Figure 1-19. Label and Carrier

1 - 1 2
(