Pickup Roller Unit Removal; Carriage Home Position Sensor Removal - Epson Stylus 820 Service Manual

Disassembly and Assembly

3.2.6.4 Pickup Roller Unit Removal

1. Remove the printer mechanism (see Section 3.2.5).
2. Remove the ASF unit (see Section 3.2.6.2).
3. Remove the PE sensor (see Section 3.2.6.3).
4. By rotating it, remove 1 shaft holder securing the roller shaft to the frame.
5. Remove the pickup roller unit, referring the following illustration.
Pick Up Roller Unit
Figure 3-13. Pick Up Roller Unit Removal

3.2.6.5 Carriage Home Position Sensor Removal

1. Remove the printer mechanism (see Section 3.2.5).
2. Disconnect the CN8 on the C160 MAIN Board.
3. Remove the 2 CPS (M3x6) screws securing the metal stay to the printer mechanism.
Carriage Home
Position Sensor
Figure 3-14. Carriage Home Position Sensor Removal
3-10
2
Carriage Motor
Stylus Color IIs / Stylus 820
1
0
Shaft Holder
CPS(M3x6)
Tension
Spring
Washer
Rev. A