Master Programming Level - Fire-Lite MS-9050UD Manual
Addressable fire alarm control panel
Hide thumbs
Also See for MS-9050UD:
- Operating instructions (1 page) ,
- Wiring diagram (1 page) ,
- User manual (216 pages)
Table of Contents
Advertisement
Programming
3.6 Master Programming Level
When the Master Program Level password is entered, the control panel will enter user Program-
ming mode. In this mode, the piezo sounder remains off, the trouble relay is activated and the sys-
tem Trouble LED flashes until Programming mode is exited. The following display will appear:
The down arrow which appears in the display indicates that additional programming choices can be
viewed by pressing the down arrow key on the keypad. If a down and up arrow appear in the dis-
play, pressing the 'down' arrow key will display the subsequent Programming Screens as illustrated
below while pressing the 'up' arrow key will display the previous screen.
56
PROGRAMMING
1=AUTOPROGRAM
2=POINT PROGRAM
3=ZONE SETUP
Programming Screen #1
PROGRAMMING
1=LOOP SETUP
2=SYSTEM SETUP
3=VERIFY LOOP
Programming Screen #2
PROGRAMMING
1=HISTORY
2=WALKTEST
3=OPTION MODULES
Programming Screen #3
PROGRAMMING
1=PASSWORD CHANGE
2=CLEAR PROGRAM
3=PROGRAM CHECK
Programming Screen #4
MS-9050 Series Manual — P/N 52413:F 10/22/2010
Master Programming Level
Advertisement
Table of Contents
