13: Service Terminal; 14: Print - Fire-Lite MS-9050UD Manual

Operating Instructions
4.22.13 Service Terminal
READ STATUS
1=RING COUNT
2=PRINT
3=TIME-DATE
Read Status Screen #5
4.22.14 Print
READ STATUS
1=SERVICE TERMINAL
2=PRINT
3=TIME-DATE
Read Status Screen #5
168
Pressing 1 for Ring Count, while viewing Read Status Screen #5 will display the following screens:
RING COUNT
To print program data or control panel status, press 2 while viewing Read Status Screen #5. The
following screens will be displayed:
1=HISTORY
2=WALKTEST LOG
3=WALKTEST SUMMARY
Pressing 1 while viewing Print Screen #1 allows the user to print the History file which will detail
all of the system activities since the file was last cleared from memory.
Pressing 2 while viewing Print Screen #1 allows the user to print the Walktest log which will detail
all of the system activations during walktest since the log was last cleared. Refer to "Walktest" on
page 106 for additional information on the display.
Pressing 3 while viewing Print Screen #1 allows the user to print the Walktest summary. This
screen will display a total of the tested detectors, tested modules, untested detectors and untested
modules for the current walktest session. Refer to "Walktest" on page 106 for additional informa-
tion on the display.
Pressing 1 while viewing Print Screen #2 allows the user to print the detector data for each address-
able smoke detector connected to the system. A printout, similar to the following example, will be
generated if an optional printer is connected to the FACP.
SERVICE TERMINAL
Service Terminal Screen
PRINT
Print Screen #1
PRINT
1=DETECTOR DATA
2=DACT SUMMARY
3=EXIT PRINTING
Print Screen #2
MS-9050 Series Manual — P/N 52413:F 10/22/2010
03
Read Status