Making Copies Using the Duplex Automatic Document Feeder
1
Place original in the Original Input Area face up. A stack of up to
50 originals may be place in the tray.
2
Slide the documents forward until the green indicator lights,
indicating the document is inserted correctly.
3
Adjust the side guide to the size of the paper. The guide should
just touch the side of the document.
4
Press the Start button.
5
Remove the copies from the output tray. Remove the originals
from the Original Catch Tray of the DADF.
Making Copies from the Document Glass
1
Open the Document Cover.
2
Place the original face down on the Document Glass, aligning the
left rear corner with the registration guide.
3
Close the cover before making a copy.
4
Press the Start button.
5
Remove the copies from the output tray. Remove the original
document from the Document Glass.
U
G
( C
S E R
U I D E
O P I E R
1–11
)