Cisco IE-3000-8TC Command Reference Manual page 772

show platform port-asic
transmit {port-fifo | queue |
supervisor-sram} [asic number |
port number [asic number]]
vct [asic number | port number
[asic number]]
version
| begin
| exclude
| include
expression
Though visible in the command-line help strings, the stack {control | dest-map | learning | messages |
Note
mvid | prog-parser | span | stats [asic number | port number [asic number]} keywords are not
supported.
Command Modes
Privileged EXEC
Command History Release
12.2(44)EX
Cisco IE 3000 Switch Command Reference
C-18
Display transmit information. The keywords have these meanings:
port-fifo—Display the contents of the port-FIFO information
•
register.
queue—Display the contents of the queue information
•
register.
supervisor-sram—Display supervisor SRAM information.
•
asic number—(Optional) Display information for the
•
specified ASIC. The range is 0 to 1.
port number—(Optional) Display information for the
•
specified port and ASIC number. The range is 0 to 27, where 0
is the supervisor and 1 to 25 are the ports.
Display the VLAN compression table entries for the specified
ASIC or for the specified port and ASIC. The keywords have these
meanings:
• asic number—(Optional) Display information for the
specified ASIC. The range is 0 to 1.
port number—(Optional) Display information for the
•
specified port and ASIC number. The range is 0 to 27, where
0 is the supervisor and 1 to 25 are the ports.
Display version and device type information for port ASICs.
(Optional) Display begins with the line that matches the
expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified
expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Appendix C IE 3000 Switch Show Platform Commands
OL-13019-01