Show Vmps - Cisco IE-3000-8TC Command Reference Manual

show vmps

show vmps
Use the show vmps user EXEC command without keywords to display the VLAN Query Protocol (VQP)
version, reconfirmation interval, retry count, VLAN Membership Policy Server (VMPS) IP addresses,
and the current and primary servers, or use the statistics keyword to display client-side statistics.
Syntax Description statistics
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(44)EX
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show vmps command:
Switch> show vmps
VQP Client Status:
--------------------
VMPS VQP Version:
Reconfirm Interval: 60 min
Server Retry Count: 3
VMPS domain server:
Reconfirmation status
---------------------
VMPS Action:
This is an example of output from the show vmps statistics command.
in the display.
Switch> show vmps statistics
VMPS Client Statistics
----------------------
VQP
VQP
VMPS Changes:
VQP
VQP
VQP
Cisco IE 3000 Switch Command Reference
2-482
show vmps [statistics] [ | {begin | exclude | include} expression]
(Optional) Display VQP client-side statistics and counters.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
1
other
Queries:
Responses:
Shutdowns:
Denied:
Wrong Domain:
0
0
0
0
0
0
Chapter 2 IE 3000 Switch Cisco IOS Commands
Table 2-33 describes each field
OL-13019-01