Show Platform Stp-Instance - Cisco IE-3000-8TC Command Reference Manual

show platform stp-instance

show platform stp-instance
Use the show platform stp-instance privileged EXEC command to display platform-dependent
spanning-tree instance information.
Syntax Description vlan-id
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(44)EX
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Cisco IE 3000 Switch Command Reference
C-26
show platform stp-instance vlan-id [ | {begin | exclude | include} expression]
Display spanning-tree instance information for the specified VLAN. The range
is 1 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Appendix C IE 3000 Switch Show Platform Commands
OL-13019-01