Cisco IE-3000-8TC Command Reference Manual page 782

show platform tcam
usage
[[asic number [detail [invalid]] |
[index number [detail [invalid]] |
invalid | num number [detail
[invalid]] | invalid] | [invalid] |
[num number [detail [invalid]] |
invalid]]
| begin
| exclude
| include
expression
Though visible in the command-line help strings, the ipv6, equal-cost-route, multicast-expansion,
Note
secondary, and usage keywords are not supported.
Command Modes
Privileged EXEC
Command History Release
12.2(44)EX
Usage Guidelines
You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Cisco IE 3000 Switch Command Reference
C-28
Display the CAM and forwarding table usage.
Display information. The keywords have these meanings:
• asic number—Display information for the specified ASIC
device ID. The range is 0 to 15.
detail [invalid]—(Optional) Display valid or invalid details.
•
• index number—(Optional) Display information for the
specified TCAM table index. The range is 0 to 32768.
num number—(Optional) Display information for the
•
specified TCAM table number. The range is 0 to 32768.
(Optional) Display begins with the line that matches the
expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified
expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Appendix C IE 3000 Switch Show Platform Commands
OL-13019-01