Show Platform Etherchannel - Cisco IE-3000-8TC Command Reference Manual

show platform etherchannel

show platform etherchannel
Use the show platform etherchannel privileged EXEC command to display platform-dependent
EtherChannel information.
Syntax Description flags
time-stamps
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.2(44)EX
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Cisco IE 3000 Switch Command Reference
C-4
show platform etherchannel {flags | time-stamps} [ | {begin | exclude | include} expression]
Display EtherChannel port flags.
Display EtherChannel time stamps.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Appendix C IE 3000 Switch Show Platform Commands
OL-13019-01