Show Mac Address-Table Interface - Cisco IE-3000-8TC Command Reference Manual

Chapter 2 IE 3000 Switch Cisco IOS Commands

show mac address-table interface

Use the show mac address-table interface user command to display the MAC address table information
for the specified interface in the specified VLAN.
Syntax Description interface-id
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(44)EX
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mac address-table interface command:
Switch> show mac address-table interface gigabitethernet1/2
------------------------------------------
Vlan
----
1
1
Total Mac Addresses for this criterion: 2
OL-13019-01
show mac address-table interface interface-id [vlan vlan-id] [ | {begin | exclude | include}
expression]
Specify an interface type; valid interfaces include physical ports and port
channels.
(Optional) Display entries for a specific VLAN; the range is 1 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Mac Address Table
Mac Address Type
----------- ----
0030.b635.7862 DYNAMIC Gi1/2
00b0.6496.2741 DYNAMIC Gi1/2
Ports
-----
Cisco IE 3000 Switch Command Reference
show mac address-table interface
2-419