Cisco IE-3000-8TC Command Reference Manual page 601

Chapter 2 IE 3000 Switch Cisco IOS Commands
Examples This example sets the aging time as 2 hours for absolute aging for all the secure addresses on the port:
Switch(config)# interface gigabitethernet1/1
Switch(config-if)# switchport port-security aging time 120
This example sets the aging time as 2 minutes for inactivity aging type with aging enabled for configured
secure addresses on the port:
Switch(config)# interface gigabitethernet1/2
Switch(config-if)# switchport port-security aging time 2
Switch(config-if)# switchport port-security aging type inactivity
Switch(config-if)# switchport port-security aging static
This example shows how to disable aging for configured secure addresses:
Switch(config)# interface gigabitethernet1/2
Switch(config-if)# no switchport port-security aging static
Related Commands Command
show port-security
switchport port-security
OL-13019-01
Description
Displays the port security settings defined for the port.
Enables port security on a port, restricts the use of the port to a
user-defined group of stations, and configures secure MAC addresses.
switchport port-security aging
Cisco IE 3000 Switch Command Reference
2-575