Macro Description - Cisco IE-3000-8TC Command Reference Manual

macro description

macro description
Use the macro description interface configuration command to enter a description about which macros
are applied to an interface. Use the no form of this command to remove the description.
Syntax Description
description text
Defaults This command has no default setting.
Command Modes Interface configuration
Command History Release
12.2(44)EX
Usage Guidelines Use the description keyword to associate comment text, or the macro name, with an interface. When
multiple macros are applied on a single interface, the description text will be from the last applied macro.
This example shows how to add a description to an interface:
Switch(config-if)# macro description duplex settings
You can verify your settings by entering the show parser macro description privileged EXEC
command.
Related Commands Command
macro apply
macro global
macro global description
macro name
show parser macro
Cisco IE 3000 Switch Command Reference
2-200
macro description text
no macro description text
Enter a description about the macros that are applied to the specified interface.
Modification
This command was introduced.
Description
Applies a macro on an interface or applies and traces a macro on an
interface.
Applies a macro on a switch or applies and traces a macro on a switch
Adds a description about the macros that are applied to the switch.
Creates a macro.
Displays the macro definition for all macros or for the specified
macro.
Chapter 2 IE 3000 Switch Cisco IOS Commands
OL-13019-01