Debug Platform Port-Asic - Cisco IE-3000-8TC Command Reference Manual

debug platform port-asic

debug platform port-asic
Use the debug platform port-asic privileged EXEC command to enable debugging of the port
application-specific integrated circuit (ASIC) driver. Use the no form of this command to disable
debugging.
Syntax Description
interrupt
periodic
read
write
Note Though visible in the command-line help strings, the stack keyword is not supported.
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(44)EX
Usage Guidelines The undebug platform port-asic command is the same as the no debug platform port-asic command.
Related Commands Command
show debugging
Cisco IE 3000 Switch Command Reference
B-42
debug platform port-asic {interrupt | periodic | read | write}
no debug platform port-asic {interrupt | periodic | read | write}
Display port-ASIC interrupt-related function debug messages.
Display port-ASIC periodic-function-call debug messages.
Display port-ASIC read debug messages.
Display port-ASIC write debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Appendix B IE 3000 Switch Debug Commands
OL-13019-01