Test Relay - Cisco IE-3000-8TC Command Reference Manual

Chapter 2 IE 3000 Switch Cisco IOS Commands

test relay

Use the test relay privileged EXEC command to turn on or off the relay circuitry.
Using the test command alters the state (on or off) of a relay. Previous states are not saved.
Caution
Syntax Description major
minor
on
off
Command Modes\ Privileged EXEC
Command History Release
12.2(44)EX
Usage Guidelines You can use the test relay privileged EXEC command to verify relay circuitry connections to the alert
devices. You can test alarm scanners without having to create an alarm condition.
Examples This example shows how to turn on the major relay circuitry:
Switch# test relay major on
Related Commands Command
show alarm profile
show alarm settings
show facility-alarm relay
OL-13019-01
test relay {major | minor} {on| off}
Select the major relay circuitry.
Select the minor relay circuitry.
Turn on the selected relay circuitry.
Turn off the selected relay circularity.
Modification
This command was introduced.
Description
Displays all alarm profiles or a specified alarm profile and lists the
interfaces to which each profile is attached.
Displays environmental alarm settings and options.
Displays alarm relays generated on the switch.
Cisco IE 3000 Switch Command Reference
test relay
2-587