(Pbx) - Olivetti Fax-Lab 128 Instructions Manual

If you have chosen the "SET DATE/TIME" option, proceed as
follows:
1. Enter the new date and time (e.g. 13-03-06; 18:00), by press-
ing the keys: - . As each digit is entered, the cursor
will move to the next one.
2. If you wish to move the cursor to digits to be modified, press
the keys: / .
3. Then overwrite the digits with the correct ones, by pressing
the keys: - .
4. To confirm the setting, press the key:
5. To return the fax machine to its initial stand-by mode, press
the key: .
6. If you want to move back one function, press the key:
If you have chosen the "DATE FORMAT" option, proceed as
follows:
1. The display shows: "DATE FORMAT" and "DD/MM/YY".
2. If you want to select a different format from the one displayed,
press the keys: .
3. To confirm the setting, press the key:
4. To return the fax machine to its initial stand-by mode, press
the key: .
5. If you want to move back one function, press the key:
If you have chosen the "HOUR FORMAT" option, proceed as
follows:
1. The display shows: "HOUR FORMAT" and "24 HOURS".
2. If you want to select a different format from the one displayed,
press the keys: .
3. To confirm the setting, press the key:
4. To return the fax machine to its initial stand-by mode, press
the key: .
5. If you want to move back one function, press the key:
If you have chosen the 12-hour time format, the display will
show the letter "p" (post meridiem) or the letter "a" (ante
meridiem). To switch from one format to the other:
1. Repeat the procedure until the message "DATE AND TIME -
SET DATE/TIME" appears and then press the
2. Position the cursor, using the / keys, below the letter to be
modified.
3. Press the keys .
T
O SWITCH FROM A PUBLIC LINE TO A PRIVATE LINE
.
.
.
.
.
.
key.
The fax machine is set up for connection to a public line
but you can connect it to a private line and use it on a
public line, too. To do this, proceed as follows:
• Select the "PRIVATE(PBX)" parameter.
• Set the same dialling mode (tone or pulse) as the one
used by the private telephone exchange that manages
the line to which you have connected the fax machine.
If in doubt about the choice to be made, ask the com-
pany that manages your private telephone network.
To switch from the public line to the private line:
1. Press the key:
The display shows:
2. Press the keys
until the display shows:
3. Press the key:
The display shows:
4. Press the keys
until the display shows:
5. Press the key:
The display shows:
6. Press the key:
The display shows:
7. To choose the other option, "LINE TYPE - PRIVATE
(PBX)", press the keys:
8. To confirm the setting, press the key:
9. To return the fax machine to its initial stand-by mode,
press the key:
10. If you want to move back one function, press the key:
( )
PBX
11