To Set The Black List; To Modify The Black List - Olivetti Fax-Lab 128 Instructions Manual

7. Press the key:
The display shows:
8. Press the key:
The display shows the code you set previously, for
example:
9. To type the new code, press the keys:
-
10. To confirm the new code, press the key:
11. To return the fax machine to its initial stand-by mode,
press the key:
12. If you want to move back one function, press the key:
If you want to disable this function, after step 7, press the
keys to display "REMOTE CONTROL - NO", then press the
key to confirm and the
machine to its initial stand-by mode.
T
O SET THE BLACK LIST
As mentioned previously, you can save a series of un-
wanted numbers on a black list (max. 10) so as to avoid
receiving documents from the correspondents on this
list.
This function is only available if you have the caller ID
service (CLIP) and the number of rings is set to at least
2.
1. Press the key:
The display shows:
2. Press the key:
The display shows:
3. Press the keys
until the display shows:
key to return the fax
4. Press the key:
The display shows:
5. Press the key:
The display shows:
6. Dial the fax number you wish to inhibit.
To do this, press the keys:
-
7. To leave a space, to correct typing mistakes or to enter
characters or special symbols, proceed as explained in
"All that is missing now is your name and fax
number", chapter "How to get started quickly".
8. To confirm the setting, press the key:
The display shows:
At this point, you can abort the procedure or inhibit
another number.
9. To abort the procedure, press the key:
10. To block another number, repeat the procedure from
step 5.
T
O MODIFY THE BLACK LIST
1. Press the key:
The display shows:
2. Press the key:
The display shows:
3. Press the keys
until the display shows:
4. Press the key:
The display shows:
5. Press the keys
until the display shows:
4 7