Table of Contents
Advertisement
6. Press the keys
until the display shows:
7. Press the key:
The display shows:
8. To view the other available options, "CONTRAST -
DARK" and "CONTRAST - LIGHT", press the keys:
9. To confirm your choice, press the key:
10. To return the fax machine to its initial stand-by mode,
press the key:
11. If you want to move back one function, press the key:
The contrast should be regulated on the basis of the
following criteria:
•
NORMAL, if the document is neither very light nor very
dark. "NORMAL" appears on the bottom line of the display.
•
LIGHT, if the document is dark. "LIGHT" appears on the
bottom line of the display.
•
DARK, if the document is light. "DARK" appears on the bot-
tom line of the display.
T
O ADJUST THE RESOLUTION
The document must be present in the automatic
document feeder (ADF).
1. Press the key
until the desired resolution value appears on the dis-
play.
The resolution should be regulated on the basis of the
following criteria:
•
STD (STANDARD), if the document contains easily legible
characters. An "arrow" appears on the bottom line of the
display in line with the "
•
FINE, if the document contains very small characters or
drawings. An "arrow" appears on the bottom line of the dis-
play in line with the "
•
HALF TONES, if the document contains shaded areas.
An "arrow" in line with the "
with the "
" symbol printed on the console appear on the
bottom line of the display.
2 4
" symbol printed on the console.
" symbol printed on the console.
" symbol and an "arrow" in line
T
O SEND A DOCUMENT
1. Insert the document in the automatic document feeder
(ADF).
The display shows on the top line:
and on the bottom line, the default contrast value: "NOR-
MAL".
The initial resolution value is: "
If you want, change the contrast and resolution values
as described previously.
2. To dial the number of the correspondent to whom you
wish to send the document, press the keys:
-
3. To start sending the document, press the key:
If the document is sent correctly, once this operation has
been completed, the display will show the message "TX
COMPLETED" for a moment.
To delete an incorrect digit, move the cursor, using the
keys, to the right of the incorrect digit and press the
key; if you want to delete the whole number, hold down the
key for a few seconds.
If you want, you can dial the correspondent's number from
the phone book, see "To program the phone book" and
"To send a document using the quickest method".
If you want to abort the transmission in progress, press
the
key. The fax machine unloads the document from
the ADF and returns to its initial stand-by mode.
If the document to be removed consists of more than one
sheet, before pressing
the others by hand.
T
O HEAR THE DIALLING TONE WHEN SENDING A DOCUMENT
1. Insert the document in the automatic document feeder
(ADF).
The display shows on the top line:
and on the bottom line, the default contrast value: NOR-
MAL.
The initial resolution value is: "
If you want, change the contrast and resolution values
as described previously.
" (standard).
to unload the first, remove all
" (standard).
/
Advertisement
Chapters
Table of Contents
