Checking the Top Panel Indicators
Indicators on 1130 Series Access Points
If your access point is not working properly, check the LED ring on the top panel or the Ethernet and
Radio LEDs in the cable bay area. You can use the LED indications to quickly assess the unit's status.
Figure 22-5
Figure 22-5
1
2
Note
To view the Ethernet and Radio LEDs you must open the access point cover.
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
22-6
shows the access point LEDs.
1130 Series Access Point LEDs
1
2
3
Status LED
Access point cover
Chapter 22
4
3
Ethernet LED
4
Radio LED
Wireless Device Troubleshooting
OL-14209-01