Setting The Agent Contact And Location Information; Using The Snmp-Server View Command; Snmp Examples - Cisco M10-RM Software Manual

Configuring SNMP
Command
Step 5
show running-config
Step 6
copy running-config startup-config
To remove the specified host from receiving traps, use the no snmp-server host host global
configuration command. To disable a specific trap type, use the no snmp-server enable traps
notification-types global configuration command.

Setting the Agent Contact and Location Information

Beginning in privileged EXEC mode, follow these steps to set the system contact and location of the
SNMP agent so that these descriptions can be accessed through the configuration file:
Command
Step 1 configure terminal
Step 2 snmp-server contact text
Step 3 snmp-server location text
Step 4 end
Step 5
show running-config
Step 6 copy running-config startup-config

Using the snmp-server view Command

In global configuration mode, use the snmp-server view command to access Standard IEEE 802.11 MIB
objects through IEEE view and the dot11 read-write community string.
This example shows how to enable IEEE view and dot11 read-write community string:
AP(config)# snmp-server view ieee ieee802dot11 included
AP(config)# snmp-server community dot11 view ieee RW

SNMP Examples

This example shows how to enable SNMPv1, SNMPv2C, and SNMPv3. The configuration permits any
SNMP manager to access all objects with read-only permissions using the community string public. This
configuration does not cause the access point to send any traps.
AP(config)# snmp-server community public
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
18-10
Purpose
Verify your entries.
(Optional) Save your entries in the configuration
file.
Purpose
Enter global configuration mode.
Set the system contact string.
For example:
snmp-server contact Dial System Operator at beeper 21555.
Set the system location string.
For example:
snmp-server location Building 3/Room 222
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
Chapter 18 Configuring SNMP
OL-14209-01