Features; Features Introduced In This Release; Management Options - Cisco M10-RM Software Manual

Features

•
•
•
•
Features
This section lists features supported on access pointWireless devices running Cisco IOS software.
Note The proxy Mobile-IP feature is not supported in Cisco IOS Releases 12.3(2)JA and later.
Note Cisco IOS Release 12.3(8)JEC is a maintenance release only. No new features are included in this
release.

Features Introduced in This Release

Table 1-1
Table 1-1
Feature
J52 to W52 migration on the RM20 radio
for Japan.
Support for Cisco Aironet 1250 Series
Access Points
Support for the Cisco 1250 802.11n radio –

Management Options

You can use the wireless device management system through the following interfaces:
•
•
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
1-2
Features, page 1-2
Management Options, page 1-2
Roaming Client Devices, page 1-3
Network Configuration Examples, page 1-3
lists the new features in Cisco IOS Release 12.4(10b)JA and the supported platforms.
New Cisco IOS Software Features for Cisco IOS Release 12.4(10b)JA
The Cisco IOS command-line interface (CLI), which you use through a console port or Telnet
session. Use the interface dot11radio global configuration command to place the wireless device
into the radio configuration mode. Most of the examples in this manual are taken from the CLI.
Chapter 3, "Using the Command-Line Interface,"
A web-browser interface, which you use through a Web browser.
Web-Browser Interface," provides a detailed description of the web-browser interface.
Cisco Cisco
Aironet 1100 Aironet 1240
Series Series
Access Access
Points Points
x x
– x
x
provides a detailed description of the CLI.
Chapter 1 Overview
Cisco
Aironet 1300 Cisco
Series Aironet 1400
Outoor Series
Access Wireless
Point/Bridge Bridge
– –
– –
–
Chapter 2, "Using the
OL-14209-01