Cisco M10-RM Software Manual page 142

Configuring Radio Transmit Power
In the Wireless LAN Access section, choose the device you are working with. An introduction page for
Step 5
the device appears.
Step 6 In the Install and Upgrade section, choose Install and Upgrade Guides. The Install and Upgrade Guides
page for the device appears.
Step 7 Choose the hardware installation guide for the device. The home page for the guide appears.
Step 8 In the left frame, click Channels and Antenna Settings.
Table 6-3
Table 6-3 Translation between mW and dBm
dBm -1
2 5 6
mW
1 2 3 4
Beginning in privileged EXEC mode, follow these steps to set the transmit power on access point radios:
Command
Step 1 configure terminal
Step 2 interface dot11radio { 0 | 1slot/port
}
Step 3 power local
These options are available for the
802.11b, 2.4-GHz radio (in mW):
{ 1 | 5 | 20 | 30 | 50 | 100 | maximum }
These options are available for the
5-GHz radio (in mW):
{ 5 | 10 | 20 | 40 | maximum }
These options are available for the
802.11a, 5-GHz radio (in dBm):
{-1 | 2 | 5 | 8 | 11 | 14 | 15 | 17 |
maximum }
These options are available for the
AIR-RM21A 5-GHz radio (in dBm):
{ -1 | 2 | 5 | 8 | 11 | 14 | 16 | 17 | 20 |
maximum }
These options are available for the
2.4-GHz 802.11n radio (in dBM):
{ -1 | 2 | 5 | 8 | 11 | 14 | 17 | 20| 23 |
maximum }
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
6-12
shows the relationship between mW and dBm.
7 8 9 10 11
5 6 8 10 12
12 13 14 15 16
15 20 25 30 40
Purpose
Enter global configuration mode.
Enter interface configuration mode for the radio interface.
The 2.4-GHz radio is radio 0, and the 5-GHz radio is radio 1.
The 2.4-GHz 802.11n radio is 0, and the 5-GHz 802.11n radio
is 1
Set the transmit power for the 802.11b, 2.4-GHz radio or the
5-GHz radio to one of the power levels allowed in your
regulatory domain.
See the hardware installation guide for your access
Note
point to determine the power settings for your
regulatory domain.
please remove. No such command, e.g.
power local {1 | 5 | ....}" - Tania Chen
Chapter 6 Configuring Radio Settings
17 18 19 20 21
50 60 80 100 125 150 200 250
" Power local for 802.11b -
22 23 24
OL-14209-01