Chapter 2
Using the Web-Browser Interface
Figure 2-3
Select Enable for Domain Name System.
Step 5
In the Domain Name field, enter your company's domain name. At Cisco Systems, for example, the
Step 6
domain name is cisco.com.
Enter at least one IP address for your DNS server in the Name Server IP Addresses entry fields.
Step 7
Click Apply. The access point's FQDN is a combination of the system name and the domain name. For
Step 8
example, if your system name is ap1100 and your domain name is company.com, the FQDN is
ap1100.company.com.
Enter the FQDN on your DNS server.
Step 9
If you do not have a DNS server, you can register the access point's FQDN with a dynamic DNS service.
Tip
Search the Internet for dynamic DNS to find a fee-based DNS service.
OL-14209-01
Services – DNS Page
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
Enabling HTTPS for Secure Browsing
2-7