Copying Image Files By Using Ftp; Preparing To Download Or Upload An Image File By Using Ftp - Cisco M10-RM Software Manual

Working with Software Images
The algorithm installs the downloaded image on the system board Flash device (flash:). The image is
placed into a new directory named with the software version string, and the system boot path variable is
updated to point to the newly installed image.
If you kept the old image during the download process (you specified the /leave-old-sw keyword), you
can remove it by entering the delete /force /recursive filesystem:/file-url privileged EXEC command.
For filesystem, use flash: for the system board Flash device. For file-url, enter the directory name of the
old image. All the files in the directory and the directory are removed.
Uploading an Image File by Using TFTP
You can upload an image from the access point to a TFTP server. You can later download this image to
the access point or to another access point of the same type.
Caution For the download and upload algorithms to operate properly, do not rename image directories.
Beginning in privileged EXEC mode, follow these steps to upload an image to a TFTP server:
Command
Step 1
Step 1
Step 2 archive upload-sw
tftp:[[//location]/directory]/image-name.tar
The archive upload-sw privileged EXEC command builds an image file on the server by uploading
these files in order: info, the Cisco IOS image, the HTML files, and info.ver. After these files are
uploaded, the upload algorithm creates the tar file format.

Copying Image Files by Using FTP

You can download an access point image from an FTP server or upload the image from the access point
to an FTP server.
You download an access point image file from a server to upgrade the access point software. You can
overwrite the current image with the new one or keep the current image after a download.
You upload an access point image file to a server for backup purposes. You can use this uploaded image
for future downloads to the access point or another access point of the same type.
This section includes this information:
•
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
20-22
Preparing to Download or Upload an Image File by Using FTP, page 20-23
Chapter 20
Purpose
Make sure the TFTP server is properly configured; see the
"Preparing to Download or Upload an Image File by Using TFTP"
section on page 20-19.
Log into the access point through a Telnet session.
Upload the currently running access point image to the TFTP
server.
For //location, specify the IP address of the TFTP server.
•
For /directory/image-name.tar, specify the directory
•
(optional) and the name of the software image to be uploaded.
Directory and image names are case sensitive. The
image-name.tar is the name of the software image to be stored
on the server.
Managing Firmware and Configurations
OL-14209-01