Displaying The Dns Configuration; Creating A Banner; Default Banner Configuration; Configuring A Message-Of-The-Day Login Banner - Cisco M10-RM Software Manual

Chapter 5 Administering the Access PointWireless Device Access
To remove a domain name, use the no ip domain-name name global configuration command. To remove
a name server address, use the no ip name-server server-address global configuration command. To
disable DNS on the wireless device, use the no ip domain-lookup global configuration command.

Displaying the DNS Configuration

To display the DNS configuration information, use the show running-config privileged EXEC
command.
When DNS is configured on the wireless device, the show running-config command sometimes
Note
displays a server's IP address instead of its name.

Creating a Banner

You can configure a message-of-the-day (MOTD) and a login banner. The MOTD banner appears on all
connected terminals at login and is useful for sending messages that affect all network users (such as
impending system shutdowns).
The login banner also appears on all connected terminals. It appears after the MOTD banner and before
the login prompts.
For complete syntax and usage information for the commands used in this section, refer to the Cisco IOS
Note
Configuration Fundamentals Command Reference for Release 12.3.
This section contains this configuration information:
•
•
•

Default Banner Configuration

The MOTD and login banners are not configured.

Configuring a Message-of-the-Day Login Banner

You can create a single or multiline message banner that appears on the screen when someone logs into
the wireless device.
OL-14209-01
Default Banner Configuration, page 5-35
Configuring a Message-of-the-Day Login Banner, page 5-35
Configuring a Login Banner, page 5-37
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
Creating a Banner
5-35